Special inspections are a code-required layer of quality assurance for high-consequence structural work. When a building is under construction, the standard building department inspection verifies general code compliance, but it does not provide the level of technical oversight needed for complex structural work like high-strength concrete, structural steel welding, or critical bolted connections. Special inspections fill this gap. Our structural engineering services include preparing statements of special inspections for projects in all 50 states.
What Special Inspections Are
IBC Chapter 17 establishes the framework for special inspections. Special inspections are performed by qualified special inspectors employed by an approved inspection agency (not the contractor). These inspectors observe specific high-risk work during construction and document their observations. Their reports go to the building department, the owner, the contractor, and the engineer of record.
Special inspections are not the same as building department inspections. The building official’s inspector visits periodically and checks general compliance. The special inspector focuses on specific technical tasks: verifying concrete mix design meets specifications, confirming high-strength bolts are properly torqued, checking welding quality, and verifying structural steel member placement matches the approved drawings.
The statement of special inspections (SSI) is the document that defines which inspections are required for a project, who will perform them, and at what frequency. The engineer of record prepares the SSI and submits it with the permit application. For our structural engineering projects we prepare the SSI as part of the standard structural package whenever IBC Chapter 17 applies.
When Special Inspections Are Required
Concrete Work
IBC Chapter 17 requires special inspections for concrete over a certain strength threshold (typically f’c greater than 5,000 psi), for concrete in seismic force-resisting systems in higher seismic design categories, and for prestressed concrete. Concrete special inspections include verifying the approved mix design is used, sampling concrete for compressive strength testing, and observing placement and consolidation.
Structural Steel
Special inspections for structural steel include inspection of high-strength bolted connections (verifying bolt type, installation method, and tension), inspection of shop and field welds, inspection of steel framing in seismic force-resisting systems, and inspection of metal deck attachments in higher seismic design categories. Welding inspection requires a certified welding inspector (CWI) qualification.
Masonry
Masonry special inspections verify that mortar meets the specified design mix, that grout is correctly placed in grouted masonry units, and that reinforcement is correctly positioned before grouting. Masonry in higher seismic design categories requires more continuous inspection than masonry in lower seismic zones. For specialty structures using masonry construction, we specify the correct level of inspection in the SSI.
Soils and Fill
Special inspections for soils include observation and testing of fill compaction during site preparation. A special inspector collects density tests to verify that fill meets the required compaction percentage, which affects the allowable bearing capacity that the foundation design assumed. Inadequate compaction can result in settlement that damages the building.
What the Statement of Special Inspections Includes
The SSI lists every category of special inspection applicable to the project, the code section that requires the inspection, whether the inspection is continuous or periodic, the firm that will perform the inspection, and the qualifications required of the inspector. The SSI is signed by the engineer of record and submitted as part of the permit package. The building department reviews it and may have questions about the inspection scope.
During construction, the special inspector submits inspection reports to the building department as inspections are completed. At the end of construction, the inspection agency provides a final letter of compliance confirming that all required inspections were performed and all work complied with the approved documents. This letter is often required before the building department will schedule the final inspection. Learn more about our process at rightangleeng.com/engineering.
What Happens If Special Inspections Are Missed
When required special inspections are not performed, the building department may require destructive investigation to verify the quality of uninspected work. For concrete, this might mean core drilling to extract and test concrete samples. For structural steel, non-destructive testing of welds may be required. In the worst case, the department may require the contractor to remove and replace the uninspected work.
Contractors who discover during construction that required special inspections were not scheduled should contact the engineer of record and the building department immediately to discuss options. Proactive communication with the department is far more effective than waiting for the issue to be discovered at the final inspection.
Frequently Asked Questions
Who pays for special inspections?
The owner typically pays for special inspection services, which are arranged separately from the contractor’s work. Special inspections are the owner’s responsibility under IBC Chapter 17. The inspection agency is selected by the owner or engineer, not by the contractor, to maintain independence between the contractor and the inspector.
Does every commercial project require special inspections?
Not every commercial project triggers special inspection requirements. Small projects, projects in lower seismic design categories, and projects using standard materials without special requirements may not require Chapter 17 special inspections. The structural engineer evaluates each project against the Chapter 17 trigger conditions and prepares an SSI when required.
Can the contractor’s quality control inspections substitute for special inspections?
No. IBC Chapter 17 explicitly requires independence between the special inspector and the contractor. The special inspector must be employed by an approved inspection agency that is independent from the contractor. The contractor’s own quality control inspections are a best practice but do not satisfy the code requirement for special inspections.
Need a Statement of Special Inspections?
We prepare statements of special inspections as part of our structural engineering services for commercial and specialty structure projects in all 50 states. Submit at rightangleeng.com/get-started.
References
International Building Code. (2021). Chapter 17: Special Inspections and Tests. International Code Council.
American Concrete Institute. (2019). ACI 318-19: Building Code Requirements for Structural Concrete. Section 26.13: Special Inspection Requirements.
American Institute of Steel Construction. (2016). Steel Construction Manual, 15th Edition. Chapter N: Quality Control and Quality Assurance.